China Sensor - Model: Foot Sensor Switch

You are here:Home Products Automatic Door Accessories Sensor

Foot Sensor Switch

Next Product: Handwave Switch

Previous Product: Microwave snesor

Model:2053.103

Category: Automatic Door Accessories Sensor

Description:

Features:

* It is unstoppable, foot-switch sensors

* A microcomputer control and international fine shape drawing stainless steel design, with dark positive screws. Embedded seminiferous eyes on the radio-first

*Easy installation, stable performance, anti-interference capability

*Widely used in hospital operating rooms, laboratories and clean room entrance door sensors automatically control, convenient operation to eliminate the pollution of hand contact

Technical parameter:

Technology: Microprocessor modulation and demodulation of active infrared active
Recommend installation height: 0.3 m from the ground Centre. Choice of single-and double-only
Beam-biased perspective: 5 degrees

Detection mode: there feet, beam was cut off, have triggered a signal to open the door
Reaction time: relay output ꇜ 45ms

Power input: 12 ~ 36 V AC / DC
Complete machine power consumption: 82 mA surveillance signal: 4.5 smA
Signal instructions: effective control of the radio, Always a red light, green light beam was cut off when flashing.

Environmental Temperature: -20 degrees C to +55 degrees celsius

Anti-jamming: sunlight 81000LUX

Sunburn white lights: 36000LUX

Size: 123 MM * 50MM * 32MM (main controller),*19MM diameter of 12 MM (-eyes) 186MM * 175MM * 53MM (H Shell)

Output: often a dry contact relays signals